Industry news
24
February
How to Design Cooling Channels in Injection Mould for Faster Cycle Time?
February 24, 2026
In injection molding, the cooling phase typically accounts for 60%-80% of the entire production cycle and is the key bottleneck determining efficiency. Optimizing the design of injection mold cooling channels…
24
February
How to Avoid Warpage in Large Injection Moulded Parts?
February 24, 2026
Warpage in large injection molded parts is a common defect in injection molding production, especially in products with large dimensions, thin walls, or flat shapes (such as automotive dashboards, enclosures,…
21
February
What Is the Difference Between Prototype Mould and Production Mould?
February 21, 2026
Prototype molds prioritize speed, low cost, and quick validation; production molds emphasize durability, efficiency, and part-to-part consistency for scaled manufacturing.
21
February
What Are the Most Common Injection Mould Surface Finishes?
February 21, 2026
In the injection molding industry, surface treatment of injection molds is a key factor determining mold durability, demolding performance, production efficiency, and part appearance. Appropriate surface treatment can significantly extend…
20
February
What Is Gas-Assisted Injection Moulding and When to Use It?
February 20, 2026
Gas-Assisted Injection Molding is an advanced injection molding process that introduces high-pressure inert gas (typically nitrogen) on the basis of traditional injection molding. The process flow is as follows: first,…
20
February
What Is Insert Moulding and How Does It Save Assembly Costs?
February 20, 2026
Insert molding is an advanced injection molding process in which pre-prepared inserts (such as metal nuts, screws, pins, electronic components, or ceramic parts) are directly placed into the mold cavity…
19
February
How to Speed Up Injection Mould Sampling and Testing?
February 19, 2026
In injection molding production, mold sampling and testing (trial molding) is a critical step before new molds go into full production. Efficient trial molding can significantly shorten time-to-market and reduce…
19
February
How to Solve Flash Problems in Injection Moulding Production?
February 19, 2026
In the injection molding process, flash is a common defect where molten plastic escapes from the mold cavity through gaps, forming thin excess edges or fins. This not only affects…
18
February
What Is Two-Shot Injection Moulding and Its Applications?
February 18, 2026
Two-shot injection molding (also known as 2K injection, or two-shot injection molding) is an advanced precision manufacturing process that injects two different materials (or plastics of different colors or hardness…
18
February
What Are the Latest Trends in Injection Mould Technology？
February 18, 2026
In the rapidly evolving manufacturing sector, injection molding technology is undergoing a revolutionary transformation. As an efficient and precise plastic forming method, it is widely applied in the automotive, electronics,…